Fabivo
esen
Open the app

Guide · Cutting MDF

Plan your MDF cuts before buying the sheets

Fabivo turns your MDF parts list into cutting diagrams you can check before you pay: how many sheets you need, what remains and the order of the cuts.

  • Free
  • No account
  • Works offline
  • EN · ES · NL
Optimized sheet layout with the numbered cutting order Sheet 1 · 2440 × 1220 mm 93% yield ABCDEFG Reusable offcut 123 Cut order 1 → 2 → 3 · 3 mm kerf
The plan shows reusable offcuts, not just the parts that fit.
Materials
Plywood, MDF, melamine, OSB
Units
mm, cm, inches
Export
GLB, DXF, PDF, SVG, CSV
Price
Free, no sign-up

MDF is less forgiving than it looks

MDF has no grain, so you can rotate almost any part to make better use of the sheet. But it is heavy, bends when cut into long, narrow strips, and its edges absorb paint unevenly.

Planning before you buy avoids two common surprises: finding that you are half a sheet short and ending up with strips too long to handle alone.

Enter your actual parts and sheets

Start with the parts: width, height, quantity and material. Enter them by hand or import a CSV. Work in millimetres, centimetres or inches and choose the dimension order: width × height or height × width.

Then define your stock: the sheet size your supplier sells, its thickness, how many you have and the edge trim to discard. Add your saw kerf and, if needed, extra allowance for grooves or tongues.

Compare sheets, waste and cuts

Fabivo searches for a guillotine layout according to your Optimize setting: fewer sheets, lower cost or fewer cuts. The summary shows sheets used, wasted area, the largest offcut, total saw passes and parts that did not fit.

To reduce cutting, choose Fewest cuts: among layouts that use the fewest sheets, it selects the one with the fewest saw passes.

Export the plan for the workshop

Save the report as a PDF to print, the diagram as PNG or SVG to check on your phone, and the dimensions as CSV for your spreadsheet. The report includes materials and sizes, ready to order your cut parts.

Frequently asked questions

Do I need to lock the grain direction for MDF?

No: bare MDF has no visible direction, so leaving grain unconstrained improves sheet use. For veneered MDF, lock the grain as you would for melamine.

How do I avoid strips that are hard to handle?

Choose Fewest cuts under Optimize: among layouts using the fewest sheets, it selects the one with the fewest saw passes. If a strip is still too long, cut it in two first.

Can I estimate the cost?

Yes. Enter a price per sheet and the summary shows how many sheets you need, so you can calculate the cost before buying.

What if half a sheet remains?

The diagram marks the remaining area with its dimensions. Keep it for your next project instead of throwing it away.

Make the plan before loading the sheet into your car.Free, in your browser, with a PDF report.

Create my cutting plan

Updated