Comparison · Tested on November 13 and 15, 2026
Fabivo or CutList Optimizer: which suits you?
Both handle an ordinary cut list well: with the same 14 parts, both used 2 sheets. Across five difficult cut lists, Fabivo used fewer sheets in four and tied in one. Other differences matter too: what is free, how often you can calculate, and whether you start with a parts list or the furniture itself.
The short answer
- Choose CutList Optimizer if you already have a parts list and only calculate a few times a day. Its free plan allows 5 calculations a day, includes Spanish and exports PDF for free.
- Choose Fabivo if you want to start with the furniture instead of a list, calculate as often as needed or adjust sheet edge trim for free. It also suits large cut lists: across five difficult lists it used 4 fewer sheets in total. It works offline.
Differences we checked
We checked the official CutList Optimizer site without creating an account on November 13, 2026. Prices and limits can change.
| Fabivo | CutList Optimizer | |
|---|---|---|
| Price | Free | Free with limits. Paid: USD 15 or 25 per month |
| Free calculations | Unlimited | 5 per day |
| Account needed to calculate | No | No |
| Spanish interface | Yes | Yes, among 24 languages |
| Edge trim | Free | Paid only |
| Choose fewer cuts or better sheet use | Free | Paid only |
| Choose the direction of the first cuts | Free | Paid only |
| Grain, edge banding and materials | Yes | Yes, free |
| Numbered cutting order | Yes | Yes |
| Yes, through Print | Yes, free | |
| Start with the furniture | Yes: draw the furniture to get the parts | No: enter or import the list |
| Offline | Yes | No: calculates on its server |
The test: the same 14 parts
We loaded the parts for a TV stand into both tools: 14 parts in 6 sizes, 2440 × 1220 mm sheets and a 3 mm kerf. No grain constraint and no edge trim: CutList Optimizer charges for edge trim, so we disabled it in both.
| Fabivo | CutList Optimizer | |
|---|---|---|
| Parts placed | 14 of 14 | 14 of 14 |
| Sheets | 2 | 2 |
| Cuts | 17 | 18 |
| Cut length | 14.0 m | 14.0 m |
| Parts per sheet | 12 + 2 | 10 + 4 |
A tie on the main result: both use the minimum possible, since the parts total 3.19 m² and a sheet has 2.98 m². Fabivo makes one fewer cut, and both total 14.0 m of cutting when rounded to one decimal place. In Fabivo, the second sheet leaves a single 2047 × 1220 mm offcut.
Five difficult cut lists
We then tested five more demanding cut lists: two kitchens with about 100 parts each, 46 randomly sized parts, 165 small parts and a 40-part puzzle that fills exactly 4 sheets. Sheets were 2440 × 1220 mm, with a 3 mm kerf (0 for the puzzle), no grain constraint and no edge trim. We chose all five before seeing any results. The table counts the sheets each tool used.
| Cut list | Fabivo | CutList Optimizer |
|---|---|---|
| Kitchen, 94 parts | 9 | 10 |
| Puzzle, 40 parts | 4 | 5 |
| Random sizes, 46 parts | 8 | 9 |
| Small parts, 165 parts | 10 | 10 |
| Second kitchen, 100 parts | 11 | 12 |
| Total, 445 parts | 42 | 46 |
Fabivo used fewer sheets in four cut lists and tied in one. Both used 10 sheets for the small parts, but Fabivo’s last sheet is 22% occupied and CutList Optimizer’s is 64% occupied. Fabivo found the exact fit for the puzzle: 4 sheets with no waste.
Fabivo also reported less cutting length in all five. It did not win on everything: CutList Optimizer made fewer cuts for the random sizes and the small parts. These are the lengths each tool reports; we did not check whether they count them in the same way.
We improved Fabivo’s optimizer using these cases and measured it again. The CutList Optimizer figures are still from the run on November 15, 2026; we did not run it again. This is not a controlled speed comparison: Fabivo calculates on our computer and the other tool on its server.
This is our own test, not an independent evaluation. It uses a single sheet size and CutList Optimizer’s free settings. It does not measure grain constraints, edge trim or paid features.
Repeat the test
Download the parts and stock sheets as CSV and import them into CutList Optimizer. In Fabivo, open the test project. All settings and results are in the test data.
The difficult cut lists are also available as CSV: kitchen, puzzle, random sizes, small parts and second kitchen, with their stock sheets and results from both tools.
To try your own list, use the cut list optimizer or the cutting calculator. If you do not have the parts yet, draw the furniture in Fabivo to get the list.
Frequently asked questions
Which saves more sheets?
Neither on the 14-part cut list: both used 2. Across five difficult cut lists, Fabivo used 42 sheets and CutList Optimizer 46. Other parts may give different results, so try your list in both; both are free to start.
Does CutList Optimizer support Spanish?
Yes. Settings → Language offers Spanish and 23 other languages.
Does Fabivo limit calculations?
No. It calculates in your browser, so you can calculate as often as you want, including offline.
Try your own list.Enter it in the optimizer: it is free and needs no account.
Try my own partsUpdated